(NEW VENDOR) CISCO C9800-L-F-K9 Cisco Catalyst 9800-L Wireless Controller_Fiber Uplink
The Cisco® Catalyst® 9800-L is a fixed wireless controller with seamless software updates for small and midsize enterprises.
Built from the ground up for intent-based networking, the Cisco Catalyst 9800-L brings together Cisco IOS® XE Software and Cisco RF excellence to create a best-in-class wireless experience for your evolving and growing organization.
The Cisco Catalyst 9800-L is feature rich and enterprise ready to power your business-critical operations and transform end-user experiences:
● Choose between copper and fiber uplinks. This choice gives you flexibility in your network.
● High availability and seamless software updates, enabled by hot and cold patching, keep your clients and services always on in planned and unplanned events.
● Secure the air, devices, and users with the Cisco Catalyst 9800-L. The wireless infrastructure becomes the strongest first line of defense, with Encrypted Traffic Analytics (ETA) and Software-Defined Access (SD-Access). The controller comes with built-in security: Secure Boot, runtime defenses, image signing, integrity verification, and hardware authenticity.
● Built on a modular operating system, the controller features open and programmable APIs that enable automation of day-0 to day-N network operations. Model-driven streaming telemetry provides deep insights into your network and client health.
● Cisco User Defined Network, a feature available in Cisco DNA Center, allows IT to give end users control of their very own wireless network partition on a shared network. End users can then remotely and securely deploy their devices on this network. Perfect for university dormitories or extended hospital stays, Cisco User Defined Network grants both device security and control, allowing each user to choose who can connect to their network.
● The Wi-Fi 6 readiness dashboard is a new dashboard in the Assurance menu of Cisco DNA Center. It will look through the inventory of all devices on the network and verify device, software, and client compatibility with the new Wi-Fi 6 standard. After upgrading, advanced wireless analytics will indicate performance and capacity gains as a result of the Wi-Fi 6 deployment. This is an incredible tool that will help your team define where and how the wireless network should be upgraded. It will also give you insights into the access point distribution by protocol (802.11 ac/n/abg), wireless airtime efficiency by protocol, and granular performance metrics.
● With Cisco In Service Software Upgrade (ISSU), network downtime during a software update or upgrade is a thing of the past. ISSU is a complete image upgrade and update while the network is still running. The software image—or patch—is pushed onto the wireless controller while traffic forwarding continues uninterrupted. All access point and client sessions are retained during the upgrade process. With just a click, your network automatically upgrades to the newest software.
Product overview
Table 1. Key features
|
Feature
|
Description
|
|
Maximum number of access points
|
250, 500 (with Performance license)
|
|
Maximum number of clients
|
5000, 10,000 (with Performance license)
|
|
Maximum throughput
|
5 Gbps, 10 Gbps **(with Performance license)
|
|
Maximum WLANs
|
4096
|
|
Maximum VLANs
|
4096
|
|
Fixed uplinks
|
2x 10G/Multigigabit copper or 2x 10G/Multigigabit fiber
|
|
Power supply
|
110W, 12V DC, AC/DC adapter
|
|
Maximum power consumption
|
9800-L-C: 86.9W (with 4.5W USB load)
9800-L-F: 84.5W (assumes 2pc 2.5W SFP and with 4.5W USB load)
|
|
Deployment modes
|
Centralized, Cisco FlexConnect®, and fabric
|
|
Form factor
|
1RU; half-width chassis allows side-by-side installation in standard 19-in. rack
|
|
License
|
Smart License enabled
|
|
Software
|
Cisco IOS XE
|
|
Management
|
Cisco DNA Center, Cisco Prime® Infrastructure, and third party (open standards APIs)
|
|
Interoperability
|
AireOS-based controllers
|
|
Access points
|
Cisco Aironet® 802.11ac Wave 1 and Wave 2 access points, Cisco Catalyst 9100 802.11ax access points
|
Always on
The Cisco Catalyst 9800-L provides seamless software updates for faster resolution of critical issues, the ability to introduce new access points with zero downtime, and flexible software upgrades. Stateful Switchover (SSO) with active standby and N+1 redundancy keeps your network, services, and clients always on, even in unplanned events.
Secure
Secure the air, devices, and users with the Cisco Catalyst 9800-L. Wireless infrastructure becomes the strongest first line of defense with Encrypted Traffic Analytics and SD-Access. The controller comes with built-in security: Secure Boot, runtime defenses, image signing, integrity verification, and hardware authenticity. Cisco Advanced Wireless Intrusion Prevention System (aWIPS) is a complete wireless security solution that uses the Cisco Unified Access® infrastructure to detect, locate, mitigate, and contain wired and wireless rogues and threats.
Open and programmable
The Cisco Catalyst 9800-L controller is built on the Cisco IOS XE operating system, which offers a rich set of open standards-based programmable APIs and model-driven telemetry that provide an easy way to automate day-0 to day-N network operations.
Ports
Ports and their purpose
|
Port
|
Description
|
|
1x RJ-45 console port
|
Console port for out-of-band management.
|
|
1x Micro USB console port
|
Console port for out-of-band management.
|
|
1x USB 3.0 port
|
USB 3.0 port for plugging in external memory.
|
|
1x RJ-45 management port
|
Management port used for out-of-band management. Also known as the service port.
|
|
1x RJ-45 redundancy port
|
Redundancy port used for SSO.
|
|
4x 2.5G/1G and 2x 10G copper ports
|
Ports used for sending and receiving traffic between access points and controller, northbound traffic, in-band management traffic, and wireless client traffic. Must be connected to the switch.
|
|
4x 2.5G/1G copper and 2x 10G SFP+ fiber ports
|
Ports used for sending and receiving traffic between access points and controller, northbound traffic, in-band management traffic, and wireless client traffic. Must be connected to the switch.
|
SFPs supported on the C9800-L-F-K9 model
|
Type
|
Module supported
|
|
SFP
|
GLC-BX-D
|
|
GLC-BX-U
|
|
GLC-SX-MMD
|
|
GLC-ZX-MMD
|
|
GLC-TE
|
|
SFP-10G-LR
|
|
SFP-10G-LR-S
|
|
SFP-10G-LRM
|
|
SFP-10G-LR-X
|
|
SFP-10G-SR
|
|
SFP-10G-SR-S
|
|
SFP-10G-SR-X
|
|
SFP-H10GB-ACU7M
|
|
SFP-H10GB-ACU10M
|
